How to Raise pH in Pool with Baking Soda: Step-by-Step Guide for Pool Maintenance

By: warner

Hey there, pool owners! Ready to take your pool water to the next level? In this guide, we'll show you the easy steps to use baking soda like a pro. You'll learn how to raise your pool's pH and achieve perfectly balanced water that's crystal-clear and a joy to swim in. So, grab a pen and paper, because we're about to transform your pool care routine into a breeze!

How To Raise Ph In Pool With Baking Soda_1

How to Raise pH in Pool with Baking Soda: A Beginner's Guide

Struggling with low pH in your swimming pool? Baking soda to the rescue! This kitchen staple not only boosts pH but also helps maintain a stable alkalinity level. Here's a step-by-step guide to help you solve your pH woes with baking soda:

Step 1: Check Your pH and Alkalinity

Before you reach for the baking soda, it's essential to test your pool water using a test kit. You need to know the current pH and alkalinity levels to determine how much baking soda you need.

Step 2: Calculate the Baking Soda Dose

For every 10,000 gallons of pool water, you'll need about 1.25 – 1.5 pounds of baking soda to raise the pH by 0.1 units. So, do some simple math and figure out how much baking soda you need based on your pool's size and the desired pH increase.

Step 3: Dissolve the Baking Soda

Don't just sprinkle the baking soda into your pool. Instead, dissolve it first in a bucket of water. This will help prevent it from clumping and ensure it distributes evenly throughout the pool.

Step 4: Slowly Add the Solution

Walk around the pool's edge and slowly pour the dissolved baking soda solution into the water. Be sure to do it evenly to avoid creating pockets of high or low pH.

Step 5: Give It Time

Raising pH with baking soda takes a bit of time and patience. Don't expect the pH to magically jump up overnight. Run your pool pump and filter for a few hours to help circulate the baking soda and raise the pH.

Step 6: Monitor and Adjust

Check the pH periodically over the next few hours or days. If the pH hasn't reached the desired level yet, you can gradually add more baking soda. However, be cautious and avoid adding too much, as you don't want to overshoot your target.


  • Baking soda also raises alkalinity by about 10 ppm. Keep this in mind when adjusting the alkalinity levels.
  • Don't add baking soda if the pH is already above 7.2.
  • If other methods like soda ash or aeration haven't solved your pH problems, baking soda might be a good option to try.

Remember: Maintaining a balanced pH is crucial for a healthy and enjoyable swimming experience. If you have any questions or uncertainties, don't hesitate to consult a pool maintenance expert.

If you want to raise the pH level in your pool using muriatic acid, you can find a detailed guide here. For those who prefer using baking soda, we also have a helpful article here that explains the quantity of baking soda needed to achieve the desired pH level. If you're looking to raise the pH level without affecting the alkalinity, this guide provides valuable tips. Finally, for a comprehensive guide on how to raise the pH level in your pool water, refer to this page.
How To Raise Ph In Pool With Baking Soda_1

What is the correct amount of baking soda to add to a pool and how often?

Feeling intimidated by the thought of adding baking soda to your pool? Don't sweat it! Let's break it down into easy-to-digest steps.

The amount of baking soda you'll need depends on the size of your aquatic paradise and the desired pH level. Think of pH as the measure of how acidic or alkaline your water is. We aim for a slightly alkaline range, between 7.2 and 7.8, like a gentle breeze on your swimsuit.

Now, about the dosage, it's like a recipe:

  • For a cozy pool of 10,000 gallons, add about 1.5 pounds of baking soda.
  • For smaller pools, adjust the amount downward.
  • For larger pools, prepare to add more.

As for how often you should do this baking soda sprinkle, it depends on your pool's activity level and how quickly the pH dips. If you're diving in every day, you might need to add it every week or two. If it's more of a weekend splash, you can space it out to once a month.

Handy Tips to Keep in Mind:

  • Baking soda is a pH booster and an alkalinity enhancer. Think of it as the guardian angel of your pool's acidity.
  • Achieving the perfect alkalinity balance (80 to 120 ppm) is crucial for a happy and healthy pool.
  • Always start with a small pinch of baking soda and test the water before you go overboard.
  • A baking soda overdose can lead to a pH spike, disrupting your pool's harmony.

So, there you have it! Maintaining a balanced pool is not rocket science. Just remember to adjust the baking soda dosage based on your pool's size and pH cravings, and your aquatic retreat will remain a sparkling sanctuary for summer fun.

How to Evenly Distribute the Baking Soda in a Pool for Optimal pH Adjustment?

Have you ever wondered how to get baking soda evenly distributed throughout your pool for the best pH balance? Well, wonder no more! Here's a foolproof guide to ensure your pool water stays crystal clear and healthy.

Step 1: Make it Dissolve

Imagine baking soda as a shy child who doesn't want to mix with others. To encourage them, heat some water in a bucket and dissolve the baking soda before adding it to the pool. This helps it mingle with the water without forming annoying clumps.

Step 2: Pour Slowly, Spread Evenly

Just like you would sprinkle salt over a slice of pizza, you want to gradually pour the baking soda solution around the edges of the pool. Don't be tempted to dump it all in one spot; it will result in uneven distribution. Think of it like painting a room – you need to cover the entire surface!

Step 3: Let the Water Work its Magic

Once the baking soda is in the pool, give it some time to do its thing. Run the pump and filter non-stop for 24 hours. This circulation will gently disperse the baking soda and ensure it reaches every nook and cranny.

Step 4: Check and Adjust

After a day of water gymnastics, test the pH level of your pool using a trusty test kit. If it's still not quite right, don't panic! Simply adjust the amount of baking soda according to the instructions and repeat the steps above. It's like fine-tuning a piano – a few adjustments here and there, and you'll have perfect harmony.


  • Baking soda is like a magic potion that can bring your pool back to life, but don't overdo it. Too much can raise the alkalinity levels, so go slow and steady.
  • Take your time and follow the steps carefully to achieve that crystal-clear, well-balanced pool you've always dreamed of. Happy swimming!

    What are the potential risks associated with imbalanced alkalinity levels in a pool?

Maintaining the proper alkalinity balance in your swimming pool is crucial for a variety of reasons. Imbalanced alkalinity levels can lead to a host of potential risks that can impact your pool's health, your equipment, and even your enjoyment of swimming.

Understanding Alkalinity

Picture alkalinity as the pool water's superhero, shielding it from harmful acids like a protective shield. It works to maintain a stable pH level, ensuring the water's ideal balance. The sweet spot for alkalinity in your pool lies between 80 and 120 parts per million (ppm).

The Perils of Low Alkalinity

When alkalinity takes a nosedive, it's like taking off the pool's armor. Brace yourself for these potential headaches:

  • Rusty Pool Equipment: The metal components in your pool, like the heater and pump, become vulnerable to corrosion, turning into rusty relics.
  • Ouch! Skin Irritations: Low alkalinity can transform a refreshing swim into an itchy nightmare, leaving your skin feeling irritated and uncomfortable.
  • Cloudy Waters: Swimmers might feel like they're in a foggy wonderland, as low alkalinity can cloud up your pool water, obscuring the clear view.

The Dangers of High Alkalinity

While low alkalinity can wreak havoc, high alkalinity is no angel either. It can cause its own set of problems:

  • Scale Invasion: Calcium, the backbone of pool water, can form nasty scale deposits on your pool surfaces and equipment, making them look like they've been turned to stone.
  • Cloudy Aftermath: High alkalinity mimics low alkalinity, leading to cloudy water conditions.
  • Unstable pH: Controlling the pH balance in your pool becomes like trying to tame a wild mustang, as high alkalinity makes it harder to keep the pH levels in check.


Dialing in the right alkalinity level is the key to a happy and healthy pool. It shields your equipment from rust, keeps your swimmers' skin irritation-free, and ensures crystal-clear water for your enjoyment. If you're unsure about the alkalinity level in your pool, don't hesitate to test it with a reliable test kit.

Key Takeaways:

  • Low alkalinity can turn your pool into a metal junkyard and cause skin irritation, while high alkalinity invites scale buildup and makes pH control a headache.
  • Maintaining proper alkalinity is crucial for protecting your pool, keeping your swimmers comfortable, and maximizing your swimming experience.
    How To Raise Ph In Pool With Baking Soda_1


Q1: How much baking soda should I add to my pool to raise the pH?

A1: To raise the pH by 0.1 units, add 1.25 to 1.5 pounds of baking soda per 10,000 gallons of water.

Q2: How often should I add baking soda to my pool?

A2: Only add baking soda to your pool when the pH and alkalinity levels are low. Test your pool water regularly to determine if you need to add baking soda.

Q3: Is it safe to use baking soda in my pool?

A3: Yes, baking soda is safe to use in pools. It is an effective and affordable way to raise pH levels and maintain a comfortable swimming environment.

Q4: How can I tell if my pool water is too acidic or too alkaline?

A4: You can test your pool water using a pH and alkalinity test kit. The ideal pH range for a pool is 7.4 to 7.8, while the ideal alkalinity range is 80 to 120 ppm.

Q5: What are the benefits of using baking soda to raise pH in my pool?

A5: Baking soda is an effective way to raise pH levels and maintain a comfortable swimming environment. It is also affordable and easy to use. In addition, baking soda helps to maintain alkalinity levels and can prevent corrosion of pool surfaces.

Leave a Comment