How Much Baking Soda Do I Need to Raise the pH of My Pool?

By: warner

Let's dive in: Baking soda, that common kitchen staple, has a surprising secret weapon for your pool. It's a pH-adjusting superhero, ready to rescue you from overly acidic pool water. Imagine it as a magic powder that brings the balance back to your pool, turning it from a chemical chaos to a sparkling paradise.

How Much Baking Soda To Raise Ph In Pool_1

How Much Baking Soda Do I Need to Raise My Pool's pH Level?

If you're struggling with a low pH level in your pool, baking soda is your budget-friendly savior. But how much do you need? Let's break it down:

Step 1: Get to Know Your Pool

Grab a pool water test kit and measure your pool's alkalinity level. This is important because baking soda also increases alkalinity, which affects how much you'll need.

Step 2: Do the Math

Now, let's calculate how much baking soda you need:

  • For every 10,000 gallons of pool water, add 1.5 pounds of baking soda to raise alkalinity by 10 ppm and pH by 0.1 units.

Step 3: Apply Baking Soda

You've got two options:

  • Sprinkle it straight into the pool.
  • Dissolve it in a bucket of water first.

Step 4: Check and Adjust

Give the baking soda a few hours to do its magic, then test the pH and alkalinity levels again. If needed, adjust the amount of baking soda you added.

Caution Zone

  • Don't overdo it! Too much baking soda can make your pool water too alkaline, causing equipment problems.
  • If you're feeling overwhelmed, don't hesitate to reach out to a pool pro for help.

Pros of Using Baking Soda for Pool pH Adjustment:

  • It's easy and convenient.
  • It's affordable.
  • It increases both pH and alkalinity.


  • It can raise alkalinity levels too much if not used correctly.
  • It takes longer to work than other pH-raising chemicals.

If you're seeking ways to adjust your pool's pH levels, explore our guides on how to raise pH in pool with muriatic acid, how to raise pH in pool without raising alkalinity, how to raise pH in pool with baking soda, and how to raise pH in pool water.
How Much Baking Soda To Raise Ph In Pool_1

How Much Baking Soda to Raise pH in a Pool: A Simple Guide

Hey there, pool owners! Keeping your pool at the right pH level is like giving it a spa day—it feels great for your water and keeps your equipment in tip-top shape. Baking soda is your everyday superhero when it comes to bumping up that pH. But how much do you need? Let's dive in!

The Secret Sauce: Baking Soda Basics

  • It raises both pH and alkalinity levels—like a double whammy for your water.
  • The magic number is 1.5 pounds (680 grams) per 10,000 gallons to boost alkalinity by 10ppm.
  • Keep your testing kit handy to make sure you're hitting the sweet spot.

Raising pH with Baking Soda: Piece of Cake!

  1. Check Your Alkalinity: Grab your test kit and get to know what your water's alkalinity is up to.

  2. Do the Math: 10,000 gallons of water needs 1.5 pounds of baking soda to raise alkalinity by 10 ppm and pH by 0.1 units.

  3. Add the Baking Soda: You've got two options:

    • Sprinkle It On: Scatter the baking soda evenly over the pool's surface.
    • Dissolve It First: Mix the baking soda in a bucket of water before pouring it in.
  4. Test and Repeat: Let some time pass (a few hours should do it), then test the pH and alkalinity again. You might need to adjust the dosage until you reach the perfect levels.

Pros and Cons: Weighing the Options


  • Easy as pie and budget-friendly
  • Boosts both pH and alkalinity


  • Can overdo it on alkalinity if you're not careful
  • Takes a bit longer to work its magic than some other pH-raising chemicals

So, there you have it—baking soda, your secret weapon for a healthy pool. Just remember to test regularly and adjust as needed, and your pool will be the envy of the neighborhood!

Baking Soda to Raise Pool pH: How Does It Work?

Listen up, pool owners! Got a stubborn low pH level in your pool? Baking soda is your go-to secret weapon. Here's the scoop on how it does its magic.

Baking soda is like a pH superhero. When you add it to water, it transforms into a secret agent called sodium carbonate. This agent then goes on a mission to neutralize the nasty acids in your pool water. As if by magic, the pH starts rising.

The Benefits of This Wonder Ingredient:

  • Budget-friendly: Baking soda won't break the bank. It's a total steal!
  • Powerful Punch: It packs a mean pH-raising punch, getting that pH level up in no time.
  • Easy as Pie: Just dissolve it in water and pour it in. You're practically a pool expert!

A Few Things to Watch Out For:

  • Over-the-top Alkalinity: Be careful not to go overboard with baking soda. It can jack up your alkalinity levels if you're not paying attention.
  • Patience is Key: Don't expect instant results. Baking soda might take a bit longer to raise the pH compared to other chemicals.
  • Cloudy Water: It can temporarily cloud your pool water, but don't worry, it usually clears up within a few hours.

How to Use Baking Soda Like a Pro:

  1. Test your pool water to determine the current pH and alkalinity.
  2. Calculate the amount of baking soda needed based on your pool's volume and pH.
  3. Dissolve the baking soda in a bucket of warm water.
  4. Slowly add the раствор to your pool while running the pump.
  5. Re-test the pH and alkalinity levels until they reach the desired range.

So, next time your pool pH needs a boost, reach for baking soda. It's like having a superhero on your side, working tirelessly to keep your pool water sparkling and balanced.

How Much Baking Soda to Raise Pool pH: A Comprehensive Overview

Maintaining the right pH balance in your pool is a crucial aspect of pool care, and baking soda can be a great way to raise your pH if it's too low. This article will guide you through the process of using baking soda to raise pool pH, providing a step-by-step approach and helpful tips.

Understanding the Role of Baking Soda

Baking soda, also known as sodium bicarbonate, works by increasing both alkalinity and pH in your pool water. Alkalinity, measured in parts per million (ppm), refers to the amount of acid-neutralizing capacity in the water. A good alkalinity level helps protect pool equipment and surfaces from corrosion.

Determining the Amount of Baking Soda Needed

The amount of baking soda you need depends on the size of your pool and the desired pH increase. Here's a rough estimation:

Pool Size (gallons) Baking Soda Amount (pounds)
10,000 1.5
20,000 3
30,000 4.5

Step-by-Step Guide to Using Baking Soda

Step 1: Test the Pool's pH Level

Use a test kit to determine the current pH level of your pool water. The ideal pH range is between 7.2 and 7.6.

Step 2: Calculate the Baking Soda Dosage

Based on your pool size and the desired pH increase, calculate the amount of baking soda you need using the estimation table above.

Step 3: Add the Baking Soda

Spread the baking soda evenly around the pool while the pump is running. You can also dissolve it in a bucket of water and then pour the solution into the pool.

Step 4: Monitor the Results

After a few hours, retest the pool's pH level. If the desired pH is not reached, adjust the dosage accordingly.

Pros and Cons of Using Baking Soda


  • Increases both pH and alkalinity
  • Inexpensive and readily available
  • Easy to apply


  • Can raise alkalinity too high if overused
  • Takes longer to work compared to other pH increasers

    Tips for Using Baking Soda Safely

  • Always follow the recommended dosage guidelines.

  • Wear gloves when handling baking soda.
  • Never mix baking soda with any other chemicals in your pool.
  • If you have any questions or concerns, consult a pool professional.


    Using baking soda to raise pool pH is an effective and affordable solution. By following these steps and tips, you can safely and effectively adjust your pool's pH level. Remember to retest regularly and adjust the dosage as needed to maintain optimal water chemistry.
    How Much Baking Soda To Raise Ph In Pool_1


Q1: How much baking soda should I add to my pool to raise the pH?

A1: As a general rule, you should add 1.5 pounds (680 grams) of baking soda per 10,000 gallons (37,854 liters) of pool water to raise the pH by 0.1 units.

Q2: How often should I add baking soda to my pool?

A2: The frequency with which you need to add baking soda to your pool will depend on various factors, such as the size of your pool, bather load, and water chemistry. However, generally speaking, you should test your pool water regularly and add baking soda as needed to maintain the ideal pH level of 7.2 – 7.8.

Q3: What is the ideal pH level for a swimming pool?

A3: The ideal pH level for a swimming pool is between 7.2 and 7.8. A pH level below 7.2 is considered acidic, while a pH level above 7.8 is considered alkaline. Maintaining the proper pH level is essential for the health of your pool and swimmers.

Q4: Can I use baking soda to increase the alkalinity of my pool water?

A4: Yes, baking soda can be used to raise both the pH and alkalinity levels of pool water. Alkalinity acts as a buffer to prevent pH fluctuations, so it's important to maintain proper alkalinity levels to ensure stable pH.

Q5: What are the benefits of using baking soda in my pool?

A5: Baking soda is a versatile chemical that offers several benefits for pool maintenance. It helps to raise pH and alkalinity, stabilize pH levels, and soften pool water. Additionally, baking soda can help improve the effectiveness of algaecide by balancing pH levels.

Leave a Comment